BRANT RADIANT HEATERS • SERVICE • REPAIR • INSTALLATION • REPLACEMENT
Brant radiant heater service, repair & installation.
DAVESDUCTS services, diagnoses, repairs, replaces and installs applicable Brant Radiant Heaters for residential garages, workshops, commercial buildings and industrial facilities throughout Toronto and the GTA.
SERVICE & REPAIR
Already have a Brant radiant heater? We can service and repair it.
A radiant heater that will not start, shuts down unexpectedly, is not heating properly or is operating abnormally does not automatically need replacement. DAVESDUCTS can diagnose applicable Brant equipment and determine whether repair, correction, maintenance or replacement is appropriate.
Will Not Start
Diagnose applicable ignition, control, electrical, gas-supply and safety-circuit concerns.
Starts Then Shuts Down
Investigate intermittent operation, proving issues, controls and other applicable operating faults.
Ignition Problems
Inspect applicable ignition components and determine whether cleaning, adjustment or repair is required.
Burner / Combustion Concerns
Investigate abnormal burner operation and other combustion-related concerns within the service scope.
Controls & Thermostats
Diagnose applicable thermostats, wiring and heater control components.
Repair vs Replacement
Where equipment condition or parts availability makes repair impractical, we can review replacement options.
BEFORE THE SERVICE CALL
Send us the model number, rating plate and photos.
A clear photo of the Brant rating plate, heater, burner/control assembly and a description of the symptoms can help us identify the equipment and prepare for the service visit.
BRANT RADIANT HEATING
Low-intensity infrared tube heating for appropriate residential, commercial and industrial applications.
Brant manufactures gas-fired radiant tube heaters designed for a range of mounting heights and building applications. Proper heater selection depends on the exact model, building use, mounting height, required heat output, clearances, gas supply, venting and manufacturer instructions.
Residential Garages
Applicable low-mount radiant equipment can be evaluated for garages and workshops where the installation conditions support its use.
Commercial Buildings
Radiant tube heating can suit appropriate shops, service areas, warehouses and other commercial spaces.
Industrial Facilities
Brant radiant systems can be considered for larger applications where targeted radiant heating suits the building and operating conditions.
LD2 SERIES
Low-mount, two-stage infrared tube heating.
The Brant LD2 Series is intended for lower-mount applications and is available in configurations suitable for selected residential, commercial and industrial uses. Exact model availability, input, length, venting, clearances and application requirements should be confirmed using current manufacturer documentation before equipment is quoted or installed.
Lower-Mount Applications
Designed for applications where a lower mounting height is required compared with larger high-bay radiant systems.
Two-Stage Operation
Two-stage operation allows applicable equipment to operate at different firing rates according to the system design and controls.
Natural Gas or Propane
Applicable models are offered for natural-gas or propane applications. The exact fuel configuration must match the equipment and installation.
MODEL-SPECIFIC INFORMATION
We do not recommend selecting radiant equipment from an old brochure alone.
Product families, approved applications and specifications can change. DAVESDUCTS will confirm the current Brant model, input, heater length, clearances, venting and installation requirements for the actual project.
APPLICATIONS
Where Brant radiant heaters may make sense.
Infrared radiant heating is particularly useful where targeted heat, high ceilings, large floor areas or frequent door openings make conventional warm-air heating more challenging.
Garages & Workshops
Provide applicable radiant heat for vehicle storage, hobby spaces and workshops.
Shops & Service Bays
Radiant heating can suit spaces where overhead doors open frequently and occupied work zones need useful heat.
Warehouses
Applicable radiant systems can be evaluated for high-bay storage and distribution facilities.
Loading / Shipping Areas
Targeted radiant heat can be considered for appropriate loading and receiving zones.
Commercial Specialty Spaces
Selected low-mount equipment may suit appropriate commercial areas where clearances and manufacturer requirements can be met.
Industrial Applications
New or replacement radiant systems can be evaluated around the building use, heating loads and mechanical infrastructure.
INSTALLATION MATTERS
Radiant heaters must be selected and positioned for the actual space.
Capacity alone does not determine a successful installation. Mounting height, heater length, radiant coverage, combustible materials, gas piping, venting or combustion-air requirements, controls and manufacturer instructions all matter.
Clearances
Required clearances are model- and installation-specific. Vehicles, storage, lifts, doors and other building contents need to be considered.
Mounting Height
The correct mounting height and angle depend on the heater model, building geometry and intended coverage.
Gas Supply
Heater input must be considered with the existing gas piping and the building’s other connected gas-fired equipment.
Venting / Combustion Air
Requirements vary by exact heater and application and should follow the current approved manufacturer documentation.
Controls
Thermostat and staging strategy should suit the selected equipment and how the building is used.
Service Access
Burners, controls and serviceable components should remain reasonably accessible after installation.
GAS PIPING & METER COORDINATION
The radiant-heater load has to work with the building’s gas system.
One heater may be straightforward; a multi-heater commercial or industrial project can add substantial connected gas load. DAVESDUCTS can include applicable gas piping in the project and coordinate meter/service requirements where necessary.
Gas Distribution
Plan applicable mains, branches, shutoffs and distribution around the heater layout and the building’s other gas-fired equipment.
Meter Coordination
DAVESDUCTS can coordinate applicable meter/service requirements. Final utility requirements, approvals, scheduling and utility-owned work remain under the applicable gas utility.
REPLACEMENT
Replacing an older Brant heater? Review the complete installation first.
A replacement project should confirm more than nominal input. Existing heater length, mounting height, gas supply, venting, clearances, controls and service access should be reviewed before new equipment is selected.
Existing Equipment
Identify the current model, input, heater length, fuel and reason replacement is being considered.
Existing Installation
Review gas piping, venting, controls, clearances and mounting before assuming the old configuration should be repeated.
Current Equipment Selection
Select an appropriate current heater around the actual building and manufacturer requirements.
SERVICE PROCESS
Diagnose first. Repair where practical. Replace when justified.
01
Identify
Confirm the Brant model, fuel, application and reported symptoms.
02
Diagnose
Investigate applicable ignition, controls, gas supply and operating sequence.
03
Repair
Complete applicable repairs where equipment condition and parts availability support them.
04
Verify
Perform applicable operational checks after completed service work.
RELATED RADIANT HEATING
Need a different radiant-heater solution?
DAVESDUCTS can also evaluate other applicable infrared radiant systems and related gas-fired heating applications.
Infrared Radiant Heaters
Return to the main radiant-heater page for residential, commercial and industrial service, repair and installation.
Easy Radiant Works
Explore the site’s other radiant-heater product pathway.
SERVICE REQUEST
What should you send us?
- Project address / municipality
- Brant model number
- Clear photo of the rating plate
- Photos showing the complete heater and burner/control end
- Description of the problem or symptoms
- Natural gas or propane
- Any unusual noise, shutdown pattern or ignition issue
- For replacement/new installation: room dimensions and approximate ceiling height
- Photos or drawings showing the intended heated area
- Number of heaters for a multi-unit project
BRANT RADIANT HEATER FAQ
Service, repair, replacement and installation questions.
Does DAVESDUCTS repair Brant radiant heaters?
Yes. DAVESDUCTS diagnoses and repairs applicable Brant radiant-heater equipment, in addition to replacing and installing these systems.
Can DAVESDUCTS service a Brant heater it did not install?
Yes, for applicable equipment within our service scope. Send the model number, rating-plate photo, heater photos and symptoms when requesting service.
Can you repair a Brant heater that will not ignite?
Yes. Ignition failure is an appropriate reason for diagnostic service. The cause can involve several components or conditions, so the heater should be diagnosed rather than assuming a specific part has failed.
Do you install new Brant radiant heaters?
Yes, for applicable residential, commercial and industrial projects where the selected equipment and installation conditions are appropriate.
Can Brant radiant heaters be used in residential garages?
Selected low-mount Brant equipment is intended for appropriate residential-garage applications. The exact model, mounting height, clearances and installation requirements should be confirmed for the project.
Can DAVESDUCTS install the gas piping?
Yes. Applicable gas piping can be incorporated into the radiant-heater project, including larger distribution systems serving multiple heaters.
Can you coordinate a gas-meter upgrade?
DAVESDUCTS can coordinate applicable meter/service requirements associated with the project. Final utility requirements, approvals, scheduling and utility-owned work remain under the applicable gas utility.
Should I repair or replace an older Brant heater?
That depends on the diagnosis, equipment condition, parts availability, installation and expected remaining service life. Where repair is practical, replacement may not be necessary.
Do you still recommend the LD2 Series?
The LD2 Series remains part of the Brant product information represented on this site, but exact current model availability and specifications should be confirmed at quote time using current manufacturer documentation.
What should I send before booking service?
Send the Brant model number, rating-plate photo, photos of the heater and burner/control assembly, fuel type and a description of exactly what the heater is doing.
BRANT RADIANT HEATERS • TORONTO & THE GTA
Need a Brant radiant heater serviced, repaired, replaced or installed?
DAVESDUCTS can help with applicable Brant radiant-heater diagnostics, repair, replacement, new installation, gas piping and project coordination.
